Filter By
Categories
Categories
Imager Application
Imager Application
Bandwidth
Bandwidth
Channel Count
Channel Count
Frequency Range
Frequency Range
Output Bandwidth
Output Bandwidth
Frequency Band
Frequency Band
Signal type
Signal type
Analyzer function
Analyzer function
Appvision Officially Becomes an NI Authorized Distributor and Launches the New USRP X420!
Meet us at Electronex 2026 in Sydney (3-4 June 2026)
AppVision Australia to Join ASA 2026 as Platinum Sponsor
AppVision Australia to Showcase Terahertz Innovations as Platinum Sponsor at the 12th ANZTWS
AppVision to Sponsor and Exhibit at AUPEC 2025Subcategories
There are 1771 products.
Active filters
Reference: 7750 Series
Advanced Impulse Winding Tester provides pulse voltage outputs of 1200V/5200V/10000V and utilizes high-speed sampling technology at 200MHz/9 bits. Starting from AUD$ 7260
Reference: 7140
Specifically designed for single-phase AC/DC power measurement and analysis. Ultra-High Measurement Accuracy ±0.05% 100th-Order Harmonic Analysis Low-pass / High-pass / Band-pass Filter Functions High-Speed 500kSPS Sampling Rate Simultaneous AC+DC Measurement and Display Rated Direct Input Voltage: 800V / Input Current: 30A DC, 0.2Hz~100kHz...
Reference: 8740 Series
2-Wire Cable Harness Tester Test pin 128/256/512 Number of test file up to 500 sets Starting from AUD$ 3300
Reference: BBox One 5G
Operating Frequency: 26.5 to 29.5 GHz Antenna designed for 5G n257 band Up to 16 controllable RF channels, each channel providing: 360 ̊ phase shifter coverage with 5 ̊ per step 15 dB attenuation range with 0.5 dB per step T/R half duplex operation Software control via RJ-45 Ethernet or SPI interface CE/FCC/UKCA/ICES certified
Reference: APV-FD64-38L2
Brand: A-INFO
0.1-38GHz Broadband Frequency Divider, /64
Reference: APV-PD-110A
Brand: RFlight
1-110GHz Power Detector, 1.0mm Male
Reference: APV-AM2-3765-18
Brand: AppVision
Active X2, 37-65GHz Frequency Doubler High Harmonics Suppression
Reference: MST-204
Brand: SPEKTER
Easy operation with using automatic parameter and limit control. Test limits and values are automatically set based on user input for measurement standards and Device Under Test (DUT) parameters The Advanced AUTO-TEST mode facilitates the easy and transparent preparation of test sequences, including instruction, test point definition, and organizational...
Reference: CST-322
Brand: SPEKTER
Supports Mode 2 and Mode 3 single-phase or three-phase EVSE with fixed or detachable cable AUTOTEST functionality with presettable test steps Mains voltage measurements Phase sequence indication Detailed Control Pilot signal analysis Connection to the smartphone App for data transfer PE PRE-TEST test pad with a warning indicator Control Pilot state...
Reference: SHN914A
Brand: Siglent
The new SIGLENT SHN914A Handheld Vector Network Analyzers has a frequency range of 30 kHz to 14 GHz and supports 2-port scattering parameter, differential-parameter, and time-domain parameter measurements.
Reference: A-INFO TERMINATION
Brand: A-INFO
A-INFO Chip Termination
