Reference: Model 446
SCI 446, 5kV @ 20mA AC Hipot, 6kV @ 5mA DC Hipot, Insulation Resistance, 40A AC Ground Bond Tester, CE Listed
AC/DC/IR AND GB TESTER
Subcategories
Reference: Model 446
AC/DC/IR AND GB TESTER
Reference: Model 294
6 kV @ 5 mA DC Hipot Tester
Reference: S3011H
30W, 70V,3A DC, 10A Pulse, Single-Channel SMU
Reference: SSA3015X Plus
Frequency range: 9 kHz to 1.5GHz. Free preamplifier, Sensitivity: -156dBm/Hz 5MHz~1.5GHz free tracking generator included, support component frequency response test. Support EMI, Digital demodulation, analog demodulation with option
Reference: MS-BS
Micsig STO110C (plus) or STO1104E Spare Battery 7500mA
Reference: CW-2438C
2438C A mode support one channel test, B mode for dual CH. Abundant power sensors, CW coaxial power sensor frequency up to 67GHz, Waveguide sensor support to 750GHz Max. dynamic range: 90dB High accuracy Internal calibration technology Flexible frequency response offset list settings, with high-power attenuator or high-power directional coupler to achieve...
Reference: CW-2438C
2438C A mode support one channel test, B mode for dual CH. Abundant power sensors, CW coaxial power sensor frequency up to 67GHz, Waveguide sensor support to 750GHz Max. dynamic range: 90dB High accuracy Internal calibration technology Flexible frequency response offset list settings, with high-power attenuator or high-power directional coupler to achieve...
Reference: SDS1104X-U
Features: 100 MHz bandwidth Real-time sampling rate up to 1 GSa/s Record length up to 14 Mpts Serial bus triggering and decoder supports protocols I2C, SPI, UART, CAN, LIN Advanced measurements on full memory (14 Mpts) Large 7-inch TFT-LCD display with 800 * 480 resolution
Reference: SDS1000X-E-FG
FG function software for SDS1000X-E oscilloscope
Reference: SSG3021X
Main Features Frequency range: 9kHz to 2.1 GHz 0.01 Hz frequency setting resolution Level output from -110 dBm to +13 dBm, Maximum level up to +20 dBm (typ.) Phase Noise : -110 dBc/ Hz @ 1 GHz , 20 kHz offset (typ.) Level accuracy ≤0.7 dB (typ.) Provides AM, FM, &PM analog modulation with internal Support external IQ modulation to generate complex...
Reference: DP10013
Key Features: 100MHz bandwidth User-selectable attenuation settings of 50:1 or 500:1 Rated to measure differential and common-mode voltage up to ±1300 V at 500:1 mode USB host port of scope or PC to supply power Compatible with any oscilloscope
Reference: USB-GPIB
Siglent USB-GPIB Adapter to allow Non-GPIB Siglent instruments to operate on an existing GPIB interface bus.
Reference: BAG-S1
Soft Carry Case for SDS2000X-E, SDS1000X/X+, SDS1000X-E/X-C, SDS1000CNL+/DL+
Reference: USB-1210
Key Features USB 2.0 Hi-speed, USB bus power 4-CH simultaneous-sampling analog input, up to 2MS/s per channel 500VDC Isolation & 256M samples FIFO Analog and digital triggering Removable screw terminals on the module Lockable USB cable for secure connective
Reference: SAG1021i
Isolated 25MHz waveform generator. Output Sine, Square, Ramp, Pulse, Noise, DC and 45 built-in waveforms. Suitable for 1000X-E, 2000X-E and 5000X Oscilloscope
Reference: SDG1032X
Main Features Dual- channel output, with bandwidth of 30MHz, amplituide up to 20Vpp. 150MSa/s sampling rate, 14Bit vertical resolution. Special circuit for Square wave function, can generate Square waves up to 30 MHz with jitter less than 300 ps+0.05 ppm of period Plenty of analog and digital modulation types: AM, DSB-AM, FM, PM, FSK, ASK, PSK and PWM...
Reference: SVA1015X
9 kHz – 1.5 GHz VNA and SpecAn
Reference: PXIe9848
Key Features ◇PXI Express specification Rev. 1.0 compliant ◇Up to 100 MS/s sampling rate & High-resolution 14-bit ADC ◇Up to 100 MHz bandwidth for analog input ◇512 MB onboard storage memory ◇Programmable input voltage range of ±0.2 V or ±2 V, or ±100 V Max (PXIe-9848H) ◇Scatter-Gather DMA data transfer for high-speed data streaming ◇One external...
Reference: SDL1000X
Main Features DC 150 V/30 A, maximum total power 200 W Adjustable current rise/fall rate 0.001 A/μs~2.5 A/μs Four static/dynamic modes: CC/CV/CP/CR Readback resolution 0.1 mV, 0.1 mA CC Dynamic mode: Continuous, pulsed, toggled CC Dynamic mode: 25 kHz, CP Dynamic mode: 12.5 kHz, CV Dynamic mode: 0.5 Hz Measuring speed of voltage and current: up to...