Appvision Officially Becomes an NI Authorized Distributor and Launches the New USRP X420!
Meet us at Electronex 2026 in Sydney (3-4 June 2026)
AppVision Australia to Join ASA 2026 as Platinum Sponsor
AppVision Australia to Showcase Terahertz Innovations as Platinum Sponsor at the 12th ANZTWS
AppVision to Sponsor and Exhibit at AUPEC 2025
Call for Price. Contact AppVision Australia.
Click a model to email AppVision for a quote.
Select a model and email AppVision for a quotation: N6791A (default) · N6792A
Keysight N6790 Series DC Electronic Load Modules provides dc electronic load capabilities for power-device, supply and battery testing. Key parameters include outputs / inputs 1 and maximum voltage 0 to 60 V.
Only parameters that differ between models are shown below. Shared series specifications are listed in Key capabilities above.
| Model | Maximum current | Input power | Module width |
|---|---|---|---|
| N6791A | 0 to 20 A | 100 W | Single-wide; up to four modules in a four-slot mainframe |
| N6792A | 0 to 40 A | 200 W | Double-wide; up to two modules in a four-slot mainframe |
AppVision Australia is an authorised Keysight distributor. Contact AppVision to confirm the exact model and configuration, compatible accessories, Australian availability, lead time and quotation.
Specific References
Reference: M9713
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 600W 0-150V 0-120A
Reference: M9718E
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 6000W 0-600V 0-120A
Reference: N62100
Brand: NGI
N62100 series is a high performance benchtop DC electronic load, supports 8 kinds of test mode, which includes CC/CV/CR/CP/CV+CC/CV+CR(CR-LED)/CR+CC,CP+CC. N62100 series also supports multi functions such as LED simulationtest, OCP/OPP/OVP test, load effect test, short circuit simulation, dynamic scaning, time measurement, impedance simulation,etc.It can...
Reference: N8352
Brand: NGI
●Voltage range：0-6V/0-15V/0-20V ●Current range：-1~1A/-2~2A/-3~3A/-5~5A ●Voltage ripple noise low to 2mVrms ●Dual LAN port and RS232 interface ●Voltage accuracy up to 0.01%+1mV ●μA level current measurement ●Ultra-fast dynamic response without overshoot ●Built-in two-channel high-accuracy DVM measurement ●High definition touch screen
Reference: SDL1030X-E
Brand: Siglent
Main Features DC 150 V/30 A, maximum total power 300 W Adjustable current rise/fall rate 0.001 A/μs~2.5 A/μs Four static/dynamic modes: CC/CV/CP/CR Readback resolution 1 mV, 1 mA CC Dynamic mode: Continuous, pulsed, toggled CC Dynamic mode: 25 kHz, CP Dynamic mode: 12.5 kHz, CV Dynamic mode: 0.5 Hz Measuring speed of voltage and current: up to 500...
Reference: M9713B
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 600W 0-500V 0-30A
Reference: EL33133A
Brand: Keysight
Outputs / inputs: 1; 2 isolated and independent inputs Maximum voltage: 0 to 150 V; 0 to 150 V per input Maximum current: 0 to 40 A; 0 to 60 A; 0 to 60 A per input; 120 A in parallel Input power: 250 W; 350 W; 300 W per input; 600 W total Operating modes: CC, CV, CR and CP Connectivity / interface: USB; LAN and USB Call for Price. Contact AppVision...
Reference: DC Power Supply/E-Load
Brand: BriPower
· Output Power: 100kW/150kW/200kW/250kW/300kW · Output Voltage: 1000V/1500V/2000V · Output Current: *2 / *3 / *4 · Auto-Ranging Output · Soft start: effectively restrain the impulse current when power on · Seamless transition between source and sink modes · Current rise time (0% -90%) <5ms · CC/CV/CP/CR mode available · Regenerative DC load function
Reference: M9718B
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 3600W 0-500V 0-120A
Reference: SDL1020X
Brand: Siglent
Main Features DC 150 V/30 A, maximum total power 200 W Adjustable current rise/fall rate 0.001 A/μs~2.5 A/μs Four static/dynamic modes: CC/CV/CP/CR Readback resolution 0.1 mV, 0.1 mA CC Dynamic mode: Continuous, pulsed, toggled CC Dynamic mode: 25 kHz, CP Dynamic mode: 12.5 kHz, CV Dynamic mode: 0.5 Hz Measuring speed of voltage and current: up to...
Reference: M9834
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Over-current, over-voltage, overpower, overheating, and polarity reversal protection Available with RS232/RS485/USB serial interfaces. Supports remote voltage compensation and multi-data storage 10 kW 0-150V 0-500A
Reference: N83624
Brand: NGI
●Voltage range: 0-6V/0-15V ●Current range: 0-1A/0-3A/0-5A ●Single device with up to 24 channels, each channel isolated, series connection available ●Fast communication response, within 10ms for all channels programming response ●Professional application software, with data analysis and report ●High-definition color LCD screen, available for local...
Reference: M9716
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 2400W 0-150V 0-240A
Reference: AC/DC Power Source & Load
Brand: BriPower
· Modular design, output power from 15kVA to 1080kVA · Bi-directional AC/DC power source, seamless transition between source and sink modes · Regenerative AC/DC load function · Output: AC, DC, AC+DC · Using true current feedback control when working in CC mode · Frequency Range: DC~ 5kHz · Soft start: effectively restrain the impulse current when power...
Reference: N61100
Brand: NGI
N61100 series is a multi-channel DC programmable electronic load, with high reliability, high integration, high cost performance and full features. It is tailored for integrated applications, featuring in high communication response speed and high stability. N61100 series is with 19-inch 3U size, up to 12 channels, and supports LAN, RS232, and RS485...
Reference: AC/DC Source and Load
Brand: BriPower
· Compact modular design, 15KVA in 4U · Bi-directional design · Output: AC, DC, AC+DC · Single unit: maximum 15KW, 450V L-N, 30A/ph, DC-1KHz output · Single phase, 3-phase, split phase, and multi-channel output · Various modes: Regenerative AC/DC source, regenerative AC/DC load, BiPolar DC source · Regenerative RLC load in full frequency range · True...
Call for Price. Contact AppVision Australia.
Click a model to email AppVision for a quote.
