EB-C2 MINI PROBE STATION

Overview:

C-2 MINI PROBE STATION is the smallest probe station that still preserves the key functions and precision that are fundamental to all probing. This size is still capable of DC and RF measurements, making it the most versatile in its size.

Everbeing tried its best to show that no label in the world can have such a sophisticated design. The following structural designs are all accumulated in series, and one of them is indispensable to manufacture the world's smallest, lightest and cheapest probe station.

1. The base is equipped with a unique anti-vibration capsule, which can make the probe body stable, and there is no vibration interference in electrical measurement, saving the budget of buying a shock-proof pad or a shock-proof table.

2. The coaxial sliding table can move quickly to find DUT, and at the same time, it has the fine-tuning positioning accuracy of 10micron. The thickness is only 25 mm, which greatly reduces the height of the center of gravity of the probe station. Other manufacturers only configure a fine-tuning slide without the quick search function (that is, from the edge to the side of the wafer, it takes hundreds of turns by hand) or equipped with another quick slide below to achieve the quick search function. The height of the two sliding tables is much higher, and the center of gravity of the whole machine suddenly becomes higher, which greatly increases the risk of stable, repeated, long-term, and high-speed measurements.

3. The proprietary technology of the fine teeth of the probe holder is indispensable for the stable positioning of the one micron. The one-stop production line reduces the height and width of the probe holder, which can realize the possibility of radio frequency x4 and DC x2 or DC x6 Sex.

4. A magnetic switch is attached to the bottom of the probe base, which greatly reduces the positioning time of the probe base. Just like when the car is started, it will go to the destination for a task. When the customer uses the probe station, it is the task of telecommunications measurement. It is necessary to locate these probe holders before using it, because The movement range of each axis of the probe holders on the market is only about 12.5mm, and can only be used within the movement range of 12.5mm. If the positioning time is shorter, it will greatly increase the use of probe stations for telecommunication measurements. Convenience before, saving time is money. At present, Yiye is the best magnet switch base among all brands, with the thinnest thickness, smoothest lever, clean magnet removal, strongest magnetism, and best anti-rust treatment.

Applications:

1. More and more products need to be measured at room temperature without oxygen or high temperature without oxygen. This small probe station can be placed in any brand of nitrogen-based glove box in an oxygen-free environment.

2. The dry nitrogen or air blown by the glove box creates a dry environment, so the environment can also be set up with a cold suction cup to measure the cold environment, and the measuring element will not produce condensation and icing.

3. Set up on a large breadboard shock-proof table together with optoelectronic components.

4. Direct erection under large solar analog light.

5. It can be set up on an instrument rack, the upper layer is the screen, the lower layer is the instrument, and the middle layer is the probe station.

6. For venues with limited space area, one can be erected as long as the area is 40×40 cm.

7. The digital microscope can be replaced with an optional four-point probe head, which is used as a bias resistance measurement for the improvement of the previous film process. After the circuit is completed, the digital microscope can be replaced again, and it can be converted back to electrical immediately Measuring probe station.

8. When you need to borrow instruments from other laboratories for electrical measurement, you can directly carry the probe station to connect to it, which can eliminate the risk of damage to the instrument.

9. When implementing cooperation plans with other customers, the probe station can be directly moved to the customer for electrical measurement verification.

Datasheet