Need More RF Bandwidth, Longer Captures or Repeatable Test Signals?
AppVision Australia Joins SDR Conference 2026 as a Sponsor
AppVision is Now an Authorized Distributor for Keysight
AppVision Officially Becomes NI Authorized Distributor and Launches the New USRP X420!
Meet us at Electronex 2026 in Sydney (3-4 June 2026)
200MHz,6kVp-p, 100X / 1000X
|
Model |
N2060Apro |
|
Bandwidth |
DC-200MHz (-3dB) |
|
Attenuation Ratio |
1:1000/100 |
|
Bandwidth Limited |
5MHz |
|
Accuracy |
±1% |
|
Input Impedance |
Between inputs:12MΩ//0.5pF Each input to ground: 6MΩ//1pF |
| Rise time | 1.75ns |
|
-Output |
＜7V |
|
-Offset (typical) |
<±5mV |
|
oscilloscope input impedance |
1MΩ |
|
CMRR (Typical) |
60Hz:＞80dB；100kHz:＞50dB |
|
Input AC Vp-p |
6000V@l/1000 600V@l/100 |
| -Options |
6VDC/300mA mains adaptor |
|
Length of BNC Cable |
90cm |
|
Length of Input Leads |
30/60cm |
|
Working Temperature |
0~50℃ |
|
Working Humidity |
20~75%RH |
| Weight |
425g |
|
Dimension (LxWxH) |
187x83x41mm |
Reference: HVP-50
Brand: PINTECH
50kV DC,35kV AC high voltage testing. Connect with digital multimeter.
Reference: DP703
Brand: Micsig
350MHz, ±700V, 20X / 200X
Reference: N1140A
Brand: PINTECH
Bandwidth 100MHz Ma. measuring voltage:14kVp-p Attenuation ratio:1000:1,100:1 Voltage overload protection Compatible with any brand's oscilloscope. 1% accuracy,compatible with any oscilloscope,standard BNC interface.
Reference: DP1504
Brand: Micsig
400MHz, ±1500V, 50X / 500X
Reference: DP7001
Brand: Micsig
150MHz, ±7000V, 100X / 1000X
Reference: DPB5150A
Brand: Siglent
Bandwidth: 100 MHz Maximum input differential voltage: 1500 V (DC + AC) Range selection (attenuation ratio): X50 / X500 Accuracy: +/- 2% Standard USB power adapter 5V/1A
Reference: N2040Apro
Brand: PINTECH
200MHz,4kVp-p, 100X / 1000X
Reference: MOIP1000P
Brand: Micsig
With Micsig's exclusive SigOFIT ™ optical isolation technology, the OIP has extremely high common-mode rejection ratio and isolation voltage, shows the true signal at its full bandwidth. It's the ultimate referee of signal fidelity measured by other voltage probes.
Reference: DP1503
Brand: Micsig
300MHz, ±1500V, 50X / 500X, 50Ω
Reference: DP3003
Brand: Micsig
300MHz, ±3000V, 100X / 1000X
Reference: HPB4010
Brand: Siglent
High Voltage Probe used with any Siglent oscilloscope. Bandwidth: 40 MHz Attenuation ratio: 1000 : 1 Maximum input differential voltage: 10 KV; DC / AC (rms), pulse ≦ 20KV peak to peak; sine wave ≦ 7KV rms Accuracy: <= 3%
Reference: PT-5160M
Brand: PINTECH
PT-5160M(70MHz,16kV) differential voltage probe provides a safety means of measuring floating potentials for all models of oscilloscopes incomplete safety. It's very helpful for high voltage testing.
Reference: N1030B
Brand: PINTECH
Bandwidth 100MHz Max. measuring voltage:3kVp-p Voltage overload protection Input impedance 4MΩ//2pF each side ground Compatible with any brand's oscilloscope. 1% accuracy,compatible with any oscilloscope,standard BNC interface.
Reference: DP3000
Brand: Micsig
100MHz, ±3000V, 100X / 1000X
Reference: N1015B
Brand: PINTECH
Frequency:DC - 100 MHz Max.voltage:1500Vp-p Humanized design Compatible with any brand's oscilloscope. 1% accuracy,compatible with any oscilloscope,standard BNC interface. 2 attenuation ratio range,easy to operating. Battery & adaptor power supply.
Reference: DP1505
Brand: Micsig
500MHz, ±1500V, 50X / 500X
200MHz,6kVp-p, 100X / 1000X
