Reference: HVP-50
Brand: PINTECH
HVP-50 (50kV)High voltage probe for digital multimeter
50kV DC,35kV AC high voltage testing. Connect with digital multimeter.
Bandwidth 100MHz Max. measuring voltage:3kVp-p Voltage overload protection Input impedance 4MΩ//2pF each side ground Compatible with any brand's oscilloscope. 1% accuracy,compatible with any oscilloscope,standard BNC interface.
|
Model |
N1030B |
|
Bandwidth(-3dB) |
DC-100MHz |
|
Attenuation Ratio |
1:1000/100 |
|
Accuracy |
±1% |
|
Input Impedance |
Between inputs:8MΩ//0.59pF Each input to ground: 4MΩ//1.18pF |
|
Rise time |
3.5ns |
|
-Output(into 50kΩ load) |
<7V |
|
-Offset(typical) |
<±5mV |
|
Oscilloscope input impedance |
1MΩ |
|
CMRR |
60Hz:>80dB;100kHz:>50dB |
|
Input AC Vp-p |
3000V@1/1000 300V@1/100 |
|
Input DC Voltage |
1500V@1/1000 150V@1/100 |
|
Length of BNC Cable |
90cm |
|
Length of InputLeads |
30/60cm |
|
Working Temperature |
0~50℃ |
|
Working Humidity |
20~75%RH |
|
Weight |
300g |
|
Size |
165*69*26 mm |
Reference: HVP-50
Brand: PINTECH
50kV DC,35kV AC high voltage testing. Connect with digital multimeter.
Reference: N1015B
Brand: PINTECH
Frequency:DC - 100 MHz Max.voltage:1500Vp-p Humanized design Compatible with any brand's oscilloscope. 1% accuracy,compatible with any oscilloscope,standard BNC interface. 2 attenuation ratio range,easy to operating. Battery & adaptor power supply.
Reference: DP3005
Brand: Micsig
500MHz, ±1500V, 50X / 500X
Reference: DP3001
Brand: Micsig
150MHz, ±3000V, 100X / 1000X
Reference: HVP-15HF
Brand: PINTECH
HVP-15HF(20kV.40MHz)high voltage probe MAX. WORKING VOLTAGE DC: 0~10kV AC : pulse ≦ 20kV peak to peak AC: Sine wave ≦7 kV rms SIGNAL / NOISE ≧ 60 d B (1kHz), ≧ 50 d B (1MHz) BANDWIDTH :DC~40 MHz (-3d B) DIVISION RATIO 1:1000
Reference: N1008B
Brand: PINTECH
Bandwidth:100MHz Attenuation ratio:100:1/10:1 1% accuracy,compatible with any oscilloscope,standard BNC interface. 2 attenuation ratio range,easy to operating.
Reference: PT-5240
Brand: PINTECH
PT-5240(40kV,75MHz) Range(Switchable):2(X500,X5000) Common Mode Voltage DC+AC peak to peak:40kV Accuracy:2% Max. measuring voltage: 20kV DC,40kVp-p AC
Reference: PT-5116
Brand: PINTECH
PT-5116 differential probe provides a safety means of measuring floating potentials for all models of oscilloscopes compatiblly.
Reference: PT-5160L
Brand: PINTECH
PT-5160L(50MHz,16kV) differential voltage probe provides a safety means of measuring floating potentials for all models of oscilloscopes incomplete safety.
Reference: P6018A
Brand: PINTECH
P6018A(18kV,100MHz)high-voltage probe Attenuation ratio: 1000:1 200MΩ//1.5PF Impedance. Max. 18kV DC,AC 12KVrms.
Reference: DP705
Brand: Micsig
500MHz, ±700V, 20X / 200X
Reference: DP7001
Brand: Micsig
150MHz, ±7000V, 100X / 1000X
Reference: P6039A
Brand: PINTECH
P6039A(39kV.50MHz)high voltage probe Division Ratio 1000:1 Input Resistance 900MΩ Input Capacitor 2.0PF Max. DC+AC pack 39kV CAT ‖ Max. AC RMS. 27KV CAT ‖ Max. Loading Current 43uA
Reference: N1070B
Brand: PINTECH
Bandwidth 100MHz Max. measuring voltage:10kVp-p Voltage overload protection Input impedance 10MΩ//2pF each side ground Compatible with any brand's oscilloscope. 1% accuracy, compatible with any oscilloscope, standard BNC interface.
Reference: DP703
Brand: Micsig
350MHz, ±700V, 20X / 200X
Reference: PT-5250
Brand: PINTECH
PT-5250, voltage 50kVp-p, suitable for testing high voltage signal, attenuator x500, x5000 according to different range selection test, BNC interface can be compatible with any brand oscilloscope use.
Bandwidth 100MHz Max. measuring voltage:3kVp-p Voltage overload protection Input impedance 4MΩ//2pF each side ground Compatible with any brand's oscilloscope. 1% accuracy,compatible with any oscilloscope,standard BNC interface.