Reference: DP7001
Brand: Micsig
Micsig DP7001 High Voltage Differential Probe, 150MHz, ±7000V, 100X / 1000X
150MHz, ±7000V, 100X / 1000X
Frequency:DC - 100 MHz Max.voltage:1500Vp-p Humanized design Compatible with any brand's oscilloscope. 1% accuracy,compatible with any oscilloscope,standard BNC interface. 2 attenuation ratio range,easy to operating. Battery & adaptor power supply.
|
Model |
N1015B |
|
Bandwidth(-3dB) |
DC-100MHz |
|
Attenuation Ratio |
1:50/500 |
|
Accuracy |
±1% |
|
Input Impedance |
Between inputs:8MΩ//1pF Each input to ground: 4MΩ//2pF |
|
Rise time |
3.5ns |
|
-Output(into 50kΩ load) |
<7V |
|
-Offset(typical) |
<±5mV |
|
Oscilloscope input impedance |
1MΩ |
|
CMRR |
60Hz:>80dB;100kHz:>50dB |
|
Input AC Vp-p |
1500V@1/500 150V@1/50 |
|
Input DC Voltage |
750V@1/500 75V@1/50 |
|
Length of BNC Cable |
90cm |
|
Length of InputLeads |
30/60cm |
|
Working Temperature |
0~50℃ |
|
Working Humidity |
20~75%RH |
|
Weight |
400g |
|
Size |
186*84*38 mm |
Reference: DP7001
Brand: Micsig
150MHz, ±7000V, 100X / 1000X
Reference: DP1504
Brand: Micsig
400MHz, ±1500V, 50X / 500X
Reference: HVP-40DM
Brand: PINTECH
HVP-40DM High Voltage Probe/high voltage DC voltage meter Short Description: DC 40kV CAT II Pollution 2 600MΩ Impedance 25kV ± 2%, 40kV ± 3%
Reference: MOIP500P
Brand: Micsig
With Micsig's exclusive SigOFIT ™ optical isolation technology, the OIP has extremely high common-mode rejection ratio and isolation voltage, shows the true signal at its full bandwidth. It's the ultimate referee of signal fidelity measured by other voltage probes.
Reference: N1070B
Brand: PINTECH
Bandwidth 100MHz Max. measuring voltage:10kVp-p Voltage overload protection Input impedance 10MΩ//2pF each side ground Compatible with any brand's oscilloscope. 1% accuracy, compatible with any oscilloscope, standard BNC interface.
Reference: PT-5240
Brand: PINTECH
PT-5240(40kV,75MHz) Range(Switchable):2(X500,X5000) Common Mode Voltage DC+AC peak to peak:40kV Accuracy:2% Max. measuring voltage: 20kV DC,40kVp-p AC
Reference: PT-5160
Brand: PINTECH
The PT-5160 differential voltage probe provides a safety means of measuring floating potentials for all models of oscilloscopes incomplete safety.
Reference: HPB4010
Brand: Siglent
High Voltage Probe used with any Siglent oscilloscope. Bandwidth: 40 MHz Attenuation ratio: 1000 : 1 Maximum input differential voltage: 10 KV; DC / AC (rms), pulse ≦ 20KV peak to peak; sine wave ≦ 7KV rms Accuracy: <= 3%
Reference: DP7000
Brand: Micsig
100MHz, ±7000V, 100X / 1000X
Reference: PT-5160L
Brand: PINTECH
PT-5160L(50MHz,16kV) differential voltage probe provides a safety means of measuring floating potentials for all models of oscilloscopes incomplete safety.
Reference: HVP-15HF
Brand: PINTECH
HVP-15HF(20kV.40MHz)high voltage probe MAX. WORKING VOLTAGE DC: 0~10kV AC : pulse ≦ 20kV peak to peak AC: Sine wave ≦7 kV rms SIGNAL / NOISE ≧ 60 d B (1kHz), ≧ 50 d B (1MHz) BANDWIDTH :DC~40 MHz (-3d B) DIVISION RATIO 1:1000
Reference: DP701
Brand: Micsig
150MHz, ±700V, 20X / 200X
Reference: DP1502
Brand: Micsig
200MHz, ±1500V, 50X / 500X
Reference: DP1500
Brand: Micsig
100MHz, ±1500V, 50X / 500X
Reference: P6039A
Brand: PINTECH
P6039A(39kV.50MHz)high voltage probe Division Ratio 1000:1 Input Resistance 900MΩ Input Capacitor 2.0PF Max. DC+AC pack 39kV CAT ‖ Max. AC RMS. 27KV CAT ‖ Max. Loading Current 43uA
Reference: P6010A
Brand: PINTECH
P6010A (10kV,120MHz)high-voltage probe High Sensitivity in the oscilloscope observation, this kind of oscilloscope is ten times sensitivity than traditional high pressure bar
Frequency:DC - 100 MHz Max.voltage:1500Vp-p Humanized design Compatible with any brand's oscilloscope. 1% accuracy,compatible with any oscilloscope,standard BNC interface. 2 attenuation ratio range,easy to operating. Battery & adaptor power supply.