Need More RF Bandwidth, Longer Captures or Repeatable Test Signals?
AppVision Australia Joins SDR Conference 2026 as a Sponsor
AppVision is Now an Authorized Distributor for Keysight
AppVision Officially Becomes NI Authorized Distributor and Launches the New USRP X420!
Meet us at Electronex 2026 in Sydney (3-4 June 2026)
Bandwidth:100MHz Attenuation ratio:100:1/10:1 1% accuracy,compatible with any oscilloscope,standard BNC interface. 2 attenuation ratio range,easy to operating.
|
Model |
N1008B |
|
Bandwidth（-3dB） |
DC-100MHz |
|
Attenuation Ratio |
1:100/10 |
|
Accuracy |
±1% |
|
Input Impedance |
Between inputs:4MΩ//1.25pF Each input to ground: 2MΩ//2.5pF |
|
Rise time |
3.5ns |
|
-Output（into 50kΩ load） |
＜7V |
|
-Offset（typical） |
＜±5mV |
|
Oscilloscope input impedance |
1MΩ |
|
CMRR |
60Hz:＞80dB；100kHz:＞50dB |
|
Input AC Vp-p |
800V@1/100 80V@1/10 |
|
Input DC Voltage |
400V@1/100 40V@1/10 |
|
Length of BNC Cable |
90cm |
|
Length of InputLeads |
30/60cm |
|
Working Temperature |
0~50℃ |
|
Working Humidity |
20~75%RH |
|
Weight |
300g |
|
Size |
165*69*26 mm |
Reference: PT-5160
Brand: PINTECH
The PT-5160 differential voltage probe provides a safety means of measuring floating potentials for all models of oscilloscopes incomplete safety.
Reference: DP1505
Brand: Micsig
500MHz, ±1500V, 50X / 500X
Reference: PT-5160L
Brand: PINTECH
PT-5160L(50MHz,16kV) differential voltage probe provides a safety means of measuring floating potentials for all models of oscilloscopes incomplete safety.
Reference: MOIP350P
Brand: Micsig
With Micsig's exclusive SigOFIT ™ optical isolation technology, the OIP has extremely high common-mode rejection ratio and isolation voltage, shows the true signal at its full bandwidth. It's the ultimate referee of signal fidelity measured by other voltage probes.
Reference: MOIP500P
Brand: Micsig
With Micsig's exclusive SigOFIT ™ optical isolation technology, the OIP has extremely high common-mode rejection ratio and isolation voltage, shows the true signal at its full bandwidth. It's the ultimate referee of signal fidelity measured by other voltage probes.
Reference: MOIP1000P
Brand: Micsig
With Micsig's exclusive SigOFIT ™ optical isolation technology, the OIP has extremely high common-mode rejection ratio and isolation voltage, shows the true signal at its full bandwidth. It's the ultimate referee of signal fidelity measured by other voltage probes.
Reference: DP3000
Brand: Micsig
100MHz, ±3000V, 100X / 1000X
Reference: P6039A
Brand: PINTECH
P6039A(39kV.50MHz)high voltage probe Division Ratio 1000：1 Input Resistance 900MΩ Input Capacitor 2.0PF Max. DC+AC pack 39kV CAT ‖ Max. AC RMS. 27KV CAT ‖ Max. Loading Current 43uA
Reference: DP700
Brand: Micsig
100MHz, ±700V, 20X / 200X
Reference: P6010A
Brand: PINTECH
P6010A (10kV,120MHz)high-voltage probe High Sensitivity in the oscilloscope observation, this kind of oscilloscope is ten times sensitivity than traditional high pressure bar
Reference: DP3003
Brand: Micsig
300MHz, ±3000V, 100X / 1000X
Reference: HVP-40DM
Brand: PINTECH
HVP-40DM High Voltage Probe/high voltage DC voltage meter Short Description： DC 40kV CAT II Pollution 2 600MΩ Impedance 25kV ± 2%, 40kV ± 3%
Reference: N2060Apro
Brand: PINTECH
200MHz,6kVp-p, 100X / 1000X
Reference: N1015B
Brand: PINTECH
Frequency:DC - 100 MHz Max.voltage:1500Vp-p Humanized design Compatible with any brand's oscilloscope. 1% accuracy,compatible with any oscilloscope,standard BNC interface. 2 attenuation ratio range,easy to operating. Battery & adaptor power supply.
Reference: DP1500
Brand: Micsig
100MHz, ±1500V, 50X / 500X
Reference: DP705
Brand: Micsig
500MHz, ±700V, 20X / 200X
Bandwidth:100MHz Attenuation ratio:100:1/10:1 1% accuracy,compatible with any oscilloscope,standard BNC interface. 2 attenuation ratio range,easy to operating.
