Recent Posts

View All
N69200 High Performance DC Electronic Load(2kW~60kW)
  • N69200 High Performance DC Electronic Load(2kW~60kW)
  • N69200 High Performance DC Electronic Load(2kW~60kW)
  • N69200 High Performance DC Electronic Load(2kW~60kW)
  • N69200 High Performance DC Electronic Load(2kW~60kW)

N69200 High Performance DC Electronic Load(2kW~60kW)

N69200
NGI

N69200 series is a high performance high power programmable DC electronic load with high reliability, high precision and multi-function. N69200 series has three voltage specifications: 150V, 600V, and 1200V. A standard 19”3U chassis can be up to 6kW. It supports parallel control and can realize power expansion through master+master and master+slave. N69200 supports three ranges of voltage, current, power and resistance, and provides high-precision measurement, which makes the test range wider of a single unit.

Call for availability & lead time
Description
Main Features

●Standalone input power: 2~60kW, 3U/6kW high power density

●Voltage range: 0~150V/0~600V/0~1200V

●Current range: up to 2500A

●CV, CC, CP, CR three ranges, wide measurement range

●Current measurement accuracy: 0.04%+0.04% F.S.

●Voltage measurement accuracy: 0.015%+0.015% F.S.

●1.6 times power loading capacity in a short time<3s

●Adjustable CV loop speed, matching different power supplies

●Voltage/current sampling rate: up to 500kHz

●Supporting parallel control, and realizing power expansion via master+master, master+slave

●Supporting SEQ test, discharge test, charge test, OCP/OPP test and short-circuit simulation

●Operation modes: CC, CV, CP, CR, CV+CC, CR+CC, CV+CR, CP+CC

●Supporting current monitoring output, external programming input, external trigger input, and 10kHz sine wave programming input

●30kHz high-speed dynamic mode, dynamic frequency sweep function

●Time measurement, rise/fall time measurement accuracy: 10μs

●Arbitrary waveform load test (Optional), sine wave up to 20kHz, supporting USB flash drive import

●Equivalent series resistance( ESR) test (Optional)

●Soft on/off function, current oscillation protection function

●Multiple protection: OCP, OVP, OPP, OTP and reverse connection detection

●Supporting 100 groups of parameters to be saved and fast recalled

●LAN/RS232/CAN as standard interface, GPIB as optional interface

●Supporting MPPT maximum power point tracking function

Application Fields

●New energy fields, such as fuel cell stacks and engines, lithium battery packs, supercapacitors, photovoltaic modules, etc.

●High-power DC power supply, such as industrial power supply, server power supply, communication power supply, etc.

●Power electronic products, such as UPS power supply, DC-DC converter, on-board charger, etc.

●Power supply, such as generator set, energy storage system, DC charging pile, etc.

●DC high-power devices, such as contactors/relays, automotive high-voltage accessories, etc.

Functions & Advantages

3U/6kW, ultra-high power density

N69200 is designed with high power density. Power of 19”3U chassis can be up to 6kW. The volume and weight are half of traditional electronic loads. Compared with traditional electronic loads with the same power, N69200 is smaller in size and lighter in weight.

3U/6kW, ultra-high power density

Parallel connection for power extension

N69200 supports parallel connection. When the load power needs to be increased, models with the same voltage specification can be connected in parallel (master + master, master + slave) to achieve the required current and power. When using N69200, users only needs to set current on the master. The slave current will be distributed automatically, which simplifies the operation steps.

parallel connection for power extension

Multiple operation modes

N69200 supports four normal working modes: CC, CV, CP, and CR. In order to cope with the change of load characteristics in the actual test process, N69200 has also been developed with CV+CC, CR+CC, CV+CR, CP+CC four combined working modes. For example, CR+CC is suitable for the startup test of power supply to prevent overcurrent protection when the power supply is turned on. CV+CR can replace the setting application of Von point. CV+CC can simulate the working mode transition process of battery charging. Users can choose different working modes for test according to their actual situation.

multiple operation modes

High speed dynamic mode, with dynamic frequency sweep

N69200 has a high-speed dynamic mode. The dynamic characteristics of the DC power supply can be tested by simulating the dynamic load behavior of the power supply through the dynamic mode. N69200 provides dynamic frequency sweep and programmable dynamic mode up to 30kHz, including CCD constant current dynamic, CVD constant voltage dynamic, CRD constant resistance dynamic, and CPD constant power dynamic. Programmable dynamic load mode allows setting of high/low range, rise/fall slew rate, pulse width and operation mode. The voltage and current sampling rate of dynamic frequency sweep mode is 500kHz. It supports linearly changing the frequency of the load current. Frequency is up to 30kHz. This mode can measure the peak voltage Vpk+, valley voltage Vpk- and occurrence frequency points of the DUT during the dynamic frequency load change process.

high speed dynamic mode, with dynamic frequency sweep

Charge & discharge test

Users can set different conditions on the front panel to meet their test demands. For example, when battery voltage is lower than initial voltage, N69200 internal counter will start counting. The counter will stop working until the battery voltage drops to cut-off voltage.

charge & discharge test

OCP( over current protection) test

During OCP test, N69200 will load under CC mode and check whether the DUT voltage is lower than cut-off voltage. If lower, N69200 will record the present loading current as the test result and shut the input to stop the test. If the DUT voltage is higher than cut-off voltage, N69200 will increase the loading current until the DUT voltage is lower than cut-off voltage or it reaches the Max. loading current.

OCP( over current protection) test

Equivalent series resistance( ESR) test (Optional)

ESR is a principal parameter of battery or supercapacitor. N69200 series offers professional ESR measurement function, which can support multiple measurement standards, and possess the advantages of accurate results and stable repeated results.

equivalent Series Resistance( ESR) test

Product Selection

Specification

Dimension

Product Details
N69200
16 other products in the same category:

Reference: SDL1030X-E

Brand: Siglent

SIGLENT SDL1030X-E 300W Programmable DC Electronic Load

Main Features DC 150 V/30 A, maximum total power 300 W Adjustable current rise/fall rate 0.001 A/μs~2.5 A/μs Four static/dynamic modes: CC/CV/CP/CR Readback resolution 1 mV, 1 mA CC Dynamic mode: Continuous, pulsed, toggled CC Dynamic mode: 25 kHz, CP Dynamic mode: 12.5 kHz, CV Dynamic mode: 0.5 Hz Measuring speed of voltage and current: up to 500...

More
Call for availability & lead time

Reference: M9834

Brand: Maynuo

M9834, 10KW Programmable DC Electronic Load, 0-500A, 0-150V

Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Over-current, over-voltage, overpower, overheating, and polarity reversal protection Available with RS232/RS485/USB serial interfaces. Supports remote voltage compensation and multi-data storage 10 kW 0-150V 0-500A

More
Call for availability & lead time

Reference: AC/DC Source and Load

Brand: BriPower

Bripower ZGX Series Regenerative AC/DC Source and Load

· Compact modular design, 15KVA in 4U · Bi-directional design · Output: AC, DC, AC+DC · Single unit: maximum 15KW, 450V L-N, 30A/ph, DC-1KHz output · Single phase, 3-phase, split phase, and multi-channel output · Various modes: Regenerative AC/DC source, regenerative AC/DC load, BiPolar DC source · Regenerative RLC load in full frequency range · True...

Call for availability & lead time

Reference: N83624

Brand: NGI

N83624 24 Channels Battery Simulator (6V,15V/CH)

●Voltage range: 0-6V/0-15V ●Current range: 0-1A/0-3A/0-5A ●Single device with up to 24 channels, each channel isolated, series connection available ●Fast communication response, within 10ms for all channels programming response ●Professional application software, with data analysis and report ●High-definition color LCD screen, available for local...

Call for availability & lead time

Reference: N62400

Brand: NGI

N62400 Low Voltage High Current DC Electronic Load(600W~7200W)

N62400 series is developed based on NGI's years of experience in testing for fuel cell. It is with high accuracy, high reliability and high cost performance. N62400 can load high current under ultra-low voltage. The minimum operating voltage when loading 1200A can be low to 0.2V. It is designed in a 19 inch 3U chassis, which is available for benchtop use...

Call for availability & lead time