Need More RF Bandwidth, Longer Captures or Repeatable Test Signals?
AppVision Australia Joins SDR Conference 2026 as a Sponsor
AppVision is Now an Authorized Distributor for Keysight
AppVision Officially Becomes NI Authorized Distributor and Launches the New USRP X420!
Meet us at Electronex 2026 in Sydney (3-4 June 2026)
The new M97XX series programmable DC electronic load is a new generation product designed by Maynuo Electronic Co., Ltd. Incorporating high-performance chips, the M97XX series delivers high speed and high accuracy with a resolution of 0.1 mV and 0.01 mA (basic accuracy is 0.03% and basic current rise speed is 2.5 A/μs). M97XX series have wide application from production lines for cell phone chargers, cell phone batteries, electronic vehicle batteries, switching power supplies, linear power supplies, and LED drivers, to research institute, automotive electronic, aeronautic and astronautic, maritime, solar cell, and fuel cell etc.test and measurement applications.
M9712B30 Electronic Load provides the maximum load to 300W, with the voltage 0-500V and current 0-15A.
M9712B30 provides a larger voltage range than M9712.
 |
① The upper half is the black Vacuum Fluorescent Display (VFD) display screen. ② Rotary knob, Turn to adjust the setting values. ③ Numeric keys 0-9, ESC key, secondary key functions ④ Keypad: set up the current, voltage, power, resistance modes(I-set, V-set, P-set, R-set, Shift and On-Off); Scroll through menus and options ⑤ Input terminals ⑥ Power switch to turn on/off the instrument ⑦ Up-Down keys, Enter key |
 |
① BNC Out connector for 0-full range current that corresponds to 0-10V output. An Oscilloscope can be connected here to view dynamic waveforms. ② Remote Measurement terminals and triggers for the input/output interface. ③ DB Sub 9 pin multifunctional communications interface for RS232, RS485, and USB serial buses (with optional M133 D sub 9 to USB conversion cable). Do not connect an M131 cable with standard RS-232 voltages on the cables connectors. Doing so may damage the instrument and is not covered by WARRANTY. |
From 150W to 200KW, You can choose models from :
Reference: M9715
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 1800W 0-150V 0-240A
Reference: M9718E
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 6000W 0-600V 0-120A
Reference: M9711
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 150W 0-150V 0-30A
Reference: M9835
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Over-current, over-voltage, overpower, overheating, and polarity reversal protection Available with RS232/RS485/USB serial interfaces. Supports remote voltage compensation and multi-data storage 15 kW 0-150V 0-500A
Reference: N6200
Brand: NGI
N6200 series is a programmable DC electronic load with high accuracy, high reliability and high cost performance. It supports local control via screen&button and remote control on PC. It is with built-in LAN port and RS232 interface. N6200 series is designed in a 19 inch 2U chassis, which is available for benchtop use or installation in 19 inch rack.
Reference: M9714
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 1200W 0-150V 0-240A
Reference: N62100
Brand: NGI
N62100 series is a high performance benchtop DC electronic load, supports 8 kinds of test mode, which includes CC/CV/CR/CP/CV+CC/CV+CR(CR-LED)/CR+CC,CP+CC. N62100 series also supports multi functions such as LED simulationtest, OCP/OPP/OVP test, load effect test, short circuit simulation, dynamic scaning, time measurement, impedance simulation,etc.It can...
Reference: NL3 Class - KS-LOAD-EL4900
Brand: Keysight
Input count: One regenerative electronic-load input per model Power ratings: 2 kW, 4 kW, 6 kW or 12 kW Voltage configurations: 80 V, 500 V or 800 V Current configurations: 8 A to 240 A depending on voltage and power rating EL4943A resistance range: 0.005 to 400 ohms EL4943A constant-power range: 0 to 12 kW Call for Price. Contact AppVision Australia....
Reference: M9717
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 3600W 0-150V 0-240A
Reference: SDL1020X-E
Brand: Siglent
Main Features DC 150 V/30 A, maximum total power 200 W Adjustable current rise/fall rate 0.001 A/μs~2.5 A/μs Four static/dynamic modes: CC/CV/CP/CR Readback resolution 1 mV, 1 mA CC Dynamic mode: Continuous, pulsed, toggled CC Dynamic mode: 25 kHz, CP Dynamic mode: 12.5 kHz, CV Dynamic mode: 0.5 Hz Measuring speed of voltage and current: up to 500 kHz...
Reference: M9713B
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 600W 0-500V 0-30A
Reference: M9717C
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 3600W 0-150V 0-5000A
Reference: M9712C
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 300W 0-150V 0-60A
Reference: M9718F
Brand: Maynuo
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV Battery test and short-circuit test functions Available with RS232/RS485/USB serial interfaces. 6000W 0-150V 0-480A
Reference: N8361
Brand: NGI
●Voltage Range:0~20V ●Current Range:-10A~+10A ●Single channel power up to 200W ●Voltage rise and fall time ≤50μs ●Current Accuracy up to 1μA ●High precision DVM ●Support front and rear outlet, easier for desktop & integration ●With digital I/O, supporting trigger test ●LAN/RS232/CAN Interface
Reference: N8352
Brand: NGI
●Voltage range：0-6V/0-15V/0-20V ●Current range：-1~1A/-2~2A/-3~3A/-5~5A ●Voltage ripple noise low to 2mVrms ●Dual LAN port and RS232 interface ●Voltage accuracy up to 0.01%+1mV ●μA level current measurement ●Ultra-fast dynamic response without overshoot ●Built-in two-channel high-accuracy DVM measurement ●High definition touch screen
