Overview:
The new M97XX series programmable DC electronic load is a new generation product designed by Maynuo Electronic Co., Ltd. Incorporating high-performance chips, the M97XX series delivers high speed and high accuracy with a resolution of 0.1 mV and 0.01 mA (basic accuracy is 0.03% and basic current rise speed is 2.5 A/μs). M97XX series have wide application from production lines for cell phone chargers, cell phone batteries, electronic vehicle batteries, switching power supplies, linear power supplies, and LED drivers, to research institute, automotive electronic, aeronautic and astronautic, maritime, solar cell, and fuel cell etc.test and measurement applications.
M9712C Electronic Load provides the maximum load to 300W, with the voltage 0-150V and current 0-60A.
M9712C provides a larger current range than M9712.
 |
① The upper half is the black Vacuum Fluorescent Display (VFD) display screen.
② Rotary knob, Turn to adjust the setting values.
③ Numeric keys 0-9, ESC key, secondary key functions
④ Keypad: set up the current, voltage, power, resistance modes(I-set, V-set, P-set, R-set, Shift and On-Off); Scroll through menus and options
⑤ Input terminals
⑥ Power switch to turn on/off the instrument
⑦ Up-Down keys, Enter key
|
 |
① BNC Out connector for 0-full range current that corresponds to 0-10V output. An Oscilloscope can be connected here to view dynamic waveforms.
② Remote Measurement terminals and triggers for the input/output interface.
③ DB Sub 9 pin multifunctional communications interface for RS232, RS485, and USB serial buses (with optional M133 D sub 9 to USB conversion cable). Do not connect an M131 cable with standard RS-232 voltages on the cables connectors. Doing so may damage the instrument and is not covered by WARRANTY.
|
From 150W to 200KW, You can choose models from :
Specifications
