When measuring EMC emissions con-ducted from the Equipment-under-test (EUT) most standards specify a LISN (or artificial mains V-network) to couple the RF from the cable and to provide a repeatable impedance at the measured frequencies. All Laplace LISNs fully comply with the relevant standards and feature a rigorous, individual calibration with hardcopy of results issued by a UK test laboratory.
Gerneral specifications
- RF output: 50ohm BNC socket for each line.
- EUT line connector: Single pole shrouded sockets, 4mm up to 32A. Additionally, for 16A types, domestic mains outlet fitted. Specify UK, US, Schuko (Euro) or As/NZ type when ordering.
- Termination impedance: Internal for CISPR16 types.
- Ground bond: Stud terminal on front panel.
- Artificial hand: All CISPR16 LISNs fitted (220pF II 510R)
- Operating temperature: -5°C to +40 °C
- Transient protection level: 150dBuV
- Earth leakage current: 80mA typ. At 50Hz.
- Note that the 16A version has separate RF networks in parallel, each with BNC RF output, to allow analysis of common mode and
- differential mode noise.


Mechanical data (Size in mm): 180*450*80(WLH)