Recent Posts

View All
Laplace LISN32A3P, CISPR16, 32A, 150kHz~30MHz, 3 phase
  • Laplace LISN32A3P, CISPR16, 32A, 150kHz~30MHz, 3 phase

Laplace LISN32A3P, CISPR16, 32A, 150kHz~30MHz, 3 phase

LAPLACE EMC
  • 3 phase
  • Current rating: 32Amps
  • Frequency range: 150kHz~30MHz
  • LISNs fully compliant with the CISPR16 standard and issued with all calibration data.
Call for availability & lead time
Description

When measuring EMC emissions con-ducted from the Equipment-under-test (EUT) most standards specify a LISN (or artificial mains V-network) to couple the RF from the cable and to provide a repeatable impedance at the measured frequencies. All Laplace LISNs fully comply with the relevant standards and feature a rigorous, individual calibration with hardcopy of results issued by a UK test laboratory.

Gerneral specifications

  • RF output: 50ohm BNC socket for each line.
  • EUT line connector: Single pole shrouded sockets, 4mm up to 32A.
  • Termination impedance: Internal for CISPR16 types.
  • Ground bond: Stud terminal on front panel.
  • Artificial hand: All CISPR16 LISNs fitted (220pF II 510R)
  • Operating temperature: -5°C to +40 °C
  • Transient protection level: 150dBuV
  • Earth leakage current: 80mA typ. At 50Hz.
  • Note that the 16A version has separate RF networks in parallel, each with BNC RF output, to allow analysis of common mode and
  • differential mode noise. 

Mechanical data (Size in mm): 535*522*445(WLH)

Product Details

Data sheet

LISN Phase
Three Phase
10 other products in the same category: